USING METHOD

Open the disinfector.

Put the wet towel on the towel shelf.  

Close the disinfector, press switch button, then it starts to high temperature disinfecting.

If use ultraviolet ray disinfecting, then press ultraviolet lamp button.

MAIN TECHNICAL SPECIFICATION OF THE INSTRUMENT

Rate power : 220w ( including 4w ultraviolet lamp)

Normal temperature : 70 ℃ ± 2 ℃, heating temperature : 80℃.Inside air temperature:60-70degree, towel temperature:50-60degree.

Temperature control : When temperature lower 70℃, it works normally; when temperature over 80℃, it stops and keeping temperature.

 From starts to work about 20mins, then to be normal temperature.

 It has adiabatic material, so it can works normally.

 Heat-resistant particular, durable engineering material.

 Safety Instructions

1. The applied power should match the rated power of the device itself.

2. Children are not allowed to operate this product for safety reasons.

3. Place the device on a flat, level, and sturdy surface.

4. If you want to disinfect the wet towel, make sure that the wet towel does not drip.

If it is water droplets, wring it out and put it in the device.

5. Remember to dry the backwater inside the equipment regularly. Remember to

disconnect the power before doing this.

6. Remove the disinfectant from the device with tweezers instead of bare hands.

7. Never use any corrosive detergent to clean the equipment and its iron frame.

8. Do not open or close the appliance door with force.

9. Keep the equipment away from flammable and explosive materials. Make sure the

distance between the device and the surrounding material is at least 30 cm.

10. To protect your eyes, do not stare directly at the UV lamp while you work.

11. Always ensure that the equipment door is closed when it is working

Thank you for your reading. It our pleasure to serve for you. Your inquiry will be answered within 24 hours. Also,you are warmly welcome to visit our factory. Hope to build long term cooperation with you!

Have a nice day!!!